70
7. Press [ENT] to exit.
[
▲
] or [
▼
]
[ENT]
Level BFFB 1/2
Δ
h CP: 0.000m
Δ
h
Σ
CP: 0.002m
Σ
D CP: 38.950m
Level BFFB 2/2
Σ
D
Σ
BM: 233.676m
G.H.BM : 10.0002m
Menu 1/2
Standard Mode
►
Leveling
Adjust
Note: If user end the Leveling measurement on the bench mark point, this leveling
measurement job is over. User can not continue this job.
4.4 Continue Leveling
This function is used for continuing the leveling measurement.
●
The “Out Module” in the setting mode should be “Flash” or “SD”.
●
The Leveling measurement job must be ended by the “CP Close”.
●
For saving data, the “Out Module” should be set as “Flash” or “SD”.
Operating Procedures
Operation
Display
1. Select “Leveling” and press
[ENT].
2. Press [
▲
] or [
▼
] to select
“Continue Leveling” and press
[ENT].
[MENU]
[
▲
] or [
▼
]
[ENT]
Menu 1/2
Standard Mode
►
Leveling
Adjust
Leveling
Start Leveling
►
Continue Leveling
End Leveling
