19
2.7 SET
“Set” key is used for setting the parameters. When carry out the precise measurement, it is
recommended to use the continuous measuring mode which will help improve the accuracy
by the average value; “Auto power off” is available, which means that the power will be cut off
in 5 minutes without any operation; Data will be saved automatically in the Leveing mode while
power off; The backlight can be switched by using the
key.
Measure Mode
Single
／
N Times
／
Continuous
Minimum Reading
Srandard 1mm
／
Precise 0.1mm
Inverse Mode
Use / No Use
Unit
m(meter) / ft(US.ft)
Measurement
Diff B-F
Dif/TolDil/StafDif
Point No.
Increase
／
Descend
Wait Time
1~9 Second
Out Module
OFF/Flash/SD/Communication
Communication
Standard
／
User
Condition
Auto Off
5 min / Off
Contrast
1~9
Backlight
On/Off
SET
Instrument
Instrument Info
2.8 Inputting Characters
When the “Out Module” is on, user can input the alphabets and numerals in the place that
needs to be noted.
Lowercase letters and symbols are only available inputted into the Info, on other
inputting status, only capital letter and number are available.
Program Character
Maximum
Group
(SD Card Only)
Only capital letter, number and “-” etc.
8 Characters
Job
Only capital letter number and “-” etc.
8 Characters
Info
Lowercase and capital letter, number
and all symbols
16 Characters
For example: Input “Tp#7” in Info1
