Topcon BM-7AC, Instruction Manual

Page: 65 / 91

4. Communication With a PC
63
4.2.2 CA Command
The Zero-adjustment is performed.
PC Command BM-7AC
CA + (Cr ･ Lf)
OK + (Cr ･ Lf)
END + (Cr ･ Lf)
4.2.3 TF Command
The response speed of the photo-receiver circuit of the instrument is changed to the FAST mode.
PC Command BM-7AC
TF + (Cr ･ Lf)
OK + (Cr ･ Lf)
4.2.4 TS Command
The response speed of the photo-receiver circuit of the instrument is changed to the SLOW
mode.
PC Command BM-7AC
TS + (Cr ･ Lf)
OK + (Cr ･ Lf)
4.2.5 MA Command
The measurement range of the instrument is changed to the AUTO range.
PC Command BM-7AC
MA + (Cr ･ Lf)
OK + (Cr ･ Lf)