1. Before Use
15
ROTATION
This button is used to select a parameter to be inputted.
Each time the button is pressed, the selection candidate is displayed in order.
The displayed contents differ according to the parameter type.
Example :
・
→
0
→
1
→
2
→
………
→
8
→
9
→
＋
→
－
→
Ｅ
→
・
→
………
2400
→
4800
→
9600
→
19200
→
38400
→
2400
→
………
EVEN
→
ODD
→
NONE
→
EVEN
→
………
SHIFT
This button is used to move among digits when entering a multi-digit numerical value.
It moves from the highest order digit to the lowest order digit.
―
Dip Switches
―
1 LOCAL/REMOTE
This switch is used to select the control state of the instrument.
LOCAL
: Sets the LOCAL mode.
REMOTE
: Sets the REMOTE mode.
Request
・
The connection method is read into the instrument when the power is turned
ON. To change the setting
、
turn the power OFF and ON again.
2 USB/RS-232C
This switch is used to select the connection method between the instrument and PC.
USB
: Connection with PC through USB.
RS-232C
: Connection with PC through RS-232C.
Request
・
The connection method is read into the instrument when the power is turned
ON. To change the setting
、
turn the power OFF and ON again.
3 SOURCE/OBJECT
SOURCE
: Set when measuring the light source.
OBJECT
: Set when measuring the object.
Request
・
The connection method is read into the instrument when the power is turned
ON. To change the setting
、
turn the power OFF and ON again.
4 ABS/DIF
This switch is used to select the display between an absolute value and difference.
ABS
: Sets the absolute value display.
DIF
: Sets the difference display.
・
This switch can be changed during power ON.
Memo
