57
3.9 RS-232C Parameters
The RS-232C interface parameters are displayed.
Display Method
☞
「
3.1.2 Data/Setting Item Display
」
This setting is a necessary to set when BM-7AC connect with a PC through a RS-232C cable.
The procedure for setting parameter is as described below.
1
Press the [CHANGE] button.
The portion of the parameters that can be changed blink.
2
Press the [ROTATION] button and select the setting contents.
Each time the button is pressed, the display changes as shown below.
Baud rate (Communication speed):
38400
→
2400
→
4800
→
9600
→
19200
→
38400
……
Length (Data length)
:
7
→
8
→
7
…
Parity (Parity bit)
:
ODD
→
NONE
→
EVEN
→
ＯＤＤ
…
Stop bit (Stop bit)
:
1
→
2
→
1
…
・
When there are no contents to be changed, press the [ENTER] button, and move the
cursor to the next parameter.
3
After selection is finished, press the [ENTER] button.
Move the cursor to the next parameter.
4
Repeat steps 2 and 3.
・
After the stop bit has been selected, press the [ENTER] button to display the next
setting item (screen).
Memo
Memo
＊ＲＳ－２３２Ｃ
Ｐａｒａｍｅｔｅｒｓ＊
Ｂａｕｄ
ｒａｔｅ＝３８４００
Ｌｅｎｇｔｈ＝７
Ｐａｒｉｔｙ＝ＯＤＤ
Ｓｔｏｐ
ｂｉｔ＝
１
