2-13
Operation
ELECTRIC COMMAND
CENTER (Opt. Equipment)
The optional electric command center
allows remote operation of rinse system,
agitation control, and filter purge control.
Basic sprayer operation and tank rinsing
is similar to the procedure outlined
previously, with the following exceptions:
•
Agitation and Filter Purge
controls
These controls are operated by
momentarily actuating the appropriate
switches on the control box, instead of
using manual levers located on the
command center. Each control cycles
from fully closed to fully open in about 7
seconds. The valve setting for each
control is determined by monitoring the
pressure drop while actuating the
switches. (See the BASIC SPRAYER
OPERATION heading in this section for
more information on using pressure
drop to set these valves.)
•
Pump Inlet/Outlet controls
Pump Inlet and Pump Outlet control
switches are “circuit selectors” and do
not modulate flow like the Agitation and
Filter Purge switches. Although their
function is nearly identical to the manual
valves of the standard Command
Center, it should be noted that there is
no <OFF> position with either valve.
Because of this, a manual shutoff valve
is provided on the Command Center to
isolate the tank during plumbing service,
or to restrict the pump inlet flow during
use of the optional inductor system.
COMMAND CENTER
BOOM
PUMP
OUTLET
RINSE
FENCE ROW NOZZLES
EXTEND
RETRACT
RINSE TANK
RETRACT
EXTEND
MAIN TANK
PUMP
INLET
BOOM
CONTROL
LH
COMMAND CENTER
AGITATION
CONTROL
-
+
-
+
FILTER
PURGE
POWER
RH
ON
OFF
401965
Summary of Contents for TA1200
