13. Sure to cut off power before adjusting, repairing, maintenance and cleaning the
machine, especially in the maintenance of electrical, cut off power to prevent electric
shock accidents.
14.Machine must stop before varying speed.
15. Be sure the machine stopped when adjusting the distance of saw guide arm, and
fasten Hand Wheel after adjusting.
16.Machine power for three-phase alternating current, voltage fluctuations in the value
of less than 10%, Set up a separate power supply according to the rated capacity , Earth
leakage protection devices. Tt is prohibited to share wiring with the other equipment
which may cause voltage fluctuations or misuse.
17. Machine must completely on the ground, good and reliable.
18. If have any accident, please press the emergency stop button.
19. Cooling liquid may damage human skin, be careful when cleaning and operation. It
cannot drop into the underground, should be dealt with environmental requirements. To
prevent coolant splash in processing, users can set up protective railings plate.
20. In cutting chip combustible materials (such as magnesium, titanium, etc.), prohibit
pyrotechnics and should take fire measures.
21. Never sawing inflammable material in powder (such as carbon rod) to prevent fire
or explosion.
(Note: the technology date is subject to change.)
