8
Ⅶ
Lubrication system
7.1Lubrication System
1.Must refuel according to requirements of Figure7and Table 6 before start the
machine
2.Lubrication for the worm gear box: use the 30th oil to bath the box; the oil inside
the box is about 1 kg. Oil is plug into the Worm boxes from the top hole. Oil is on the
side of the box, when sawing beams at the lowest position; the Oil surface should
between the superscript. Change the oil a month after for the fist time use, after that,
changes oil each 3-6 months. There is a oil bolts in the lower worm gear box. The
bottom of Machine Box fixed with hydraulic oil and coolant oil Cypriots.
Lubrication point diagram
7.2Saw band lubrication site form
