Tonghui TH2883S4-5, Operation Manual, Page: 63 / 89

TH2883 Series Operation Manual Chapter 8 SCPI Command reference
8-10
8.3.4 COMParator subsystem commands
The COMParator subsystem commands set the compare conditions, such as Areasize, Diffzone,
Corona and Phasediff. Figure 8-5 shows the command tree of the COMParator subsystem
commands.
Figure 8-5 COMParator subsystem command tree
The BDV here stands for the destruction test, and its comparison setting method is the same
as the non-destructive test, and will be merged when writing the command syntax and query
syntax of the destructive test and the non-destructive test.
The [:STATe] command sets the comparator function to ON or OFF. The [:STATe]? query returns
the current comparator state.