TH2883 Series Operation Manual Chapter 5 Introduction to [SETUP]
5-7
Figure 5-2 Match setup page
5.3.1 Step
Select the step set in Meas. Setup interface and make sample handling of standard waveform of
each step. The instrument provides three kinds of sample mode: Manual, Auto and Loop.
Back Enter into the last step.
Next Enter into the next step.
Manual It is available in Sample mode.
Start Start sample handling of the standard waveform. The standard
waveform will be displayed in waveform display zone.
Complete Press this key to complete the acquisition of standard waveform.
Average 1 Indicate the number of sample handling.
Undo Undo the current acquisition data of standard waveform. Press this key,
the average time minus 1.
Undo ALL Undo all the acquisition data of standard waveform.
Start Start data acquisition of sample handling. Acquisition of several times
and multiple sample data can be averaged.
Return to previous menu.
Auto It is available in Sample mode.
Start The instrument will start collecting the standard waveform of sample
at every sample frequency automatically. Finally, waveform display
at appropriate frequency will be selected.
Turn down to load the sample waveform at lower frequency.
