TH2883 Series Operation Manual Chapter 3 Panels and display
3-5
Display format: XX/XX. The first two digits display the step number of the current
waveform display and comparison and the latter two digits display the total numbers of
steps. The maximum steps can be set is 20.
8
Measurement result
Show the final measurement result.
9
Comparison result
Four comparison results and their final display results.
10
Main menu for soft key
11
Function zones of soft keys
Show the corresponding function and parameter of each soft key.
12
Information
Show the state of interface selecting, availability of U disk, key lock, etc.
13
Time base
This area shows the time between the two dash lines of this waveform display area in X
direction. The time shown in this area cannot be modified by user but varies with the
sampling rate and time base zoom.
14
Peak value
Show the peak value of the current test voltage.
15
Comparison results for several steps
This area displays the comparison results for several steps. The number displays the set step
number. When the display is set as SINGLE DISPLAY, this area displays the corona of the
selected step.
16
Sampling rate
Show the sampling rate of the current waveform, which can be altered by the [Modify] soft
key and the roller.
17
Impulse voltage
Show the current set impulse voltage.
18
Final measurement result
Show the final measurement result. When the measurement results of all steps are PASS, the
final measurement result displays PASS, or else displays FAIL. When the display is set as
SINGLE DISPLAY, there is no display in this area.
19
Time
Display the real time.
