TH2883 Series Operation Manual Chapter 8 SCPI Command reference
8-9
8.3.3 SRATE subsystem commands
The Sample RATE subsystem commands set the sample rate and the time base zoom. Figure 8-4
shows the Sample RATE subsystem command tree.
Figure 8-4 Sample RATE subsystem command tree
The :RATE command sets the sample rate. The :RATE? query returns the current sample rate.
Command syntax: SRATE[:RATE] <value>
Where,
<value> The available values are listed as follows:
200msa/s(200m),100msa/s
，
50msa/s,25msa/s,12.5msa/s,6.25msa/s,
3.12msa/s,1.56msa/s
For example: WrtCmd( “SRATE:RATE 100MSa/s” ); 100MSa/s.
Command syntax: SRATE[:RATE]?
Return format: <NR2 Msa/s><NL^END>
