TH2883 Series Operation Manual Chapter 8 SCPI Command reference
8-6
Where,
ON the grid display mode is ON.
OFF the grid display mode is OFF.
For example: WrtCmd( “DISP:GRID ON” ); the grid display mode is ON.
Query syntax: DISPlay:GRID?
Return format:
OFF
<NL^END>
ON
Where,
Off means that the current grid display mode is OFF.
On means that the current grid display mode is ON.
The :MEASdisp command sets the steps to measure waveform display.
Command syntax:
DISPlay:MEASdisp UP Return to the last measurement waveform graph and result
DOWN Return to the next measurement waveform graph and result
For example: WrtCmd( “DISP:MEASdisp UP” ); Set to display the test result of the last step.
8.3.2 IVOLTage subsystem commands
The Impulse VOLTage subsystem commands set the impulse voltage, average times, impulse
voltage auto adjust and delay, etc. Figure 8-3 shows the Impulse VOLTage subsystem command
tree.
