TH2683A Operation Manual
Ver.1.3
32
repeatability and correction interpolation error.
Checking the measurement accuracy should be taken under the following circumstances:
a
．
Warm
‐
up time should be more than 30 minutes.
b
．
Correctly open the output terminal and perform zero clearing by pressing the
start key on the MEAS SETUP page.
5.3.1
Basic Accuracy for Resistance Measurement
SLOW, FAST: (This accuracy is obtained under the temperature of 20±5
℃
)
Test accuracy
Voltage
≥
10V and I
＞
10nA
:±2%
Voltage
≤
10V or I
≤
10nA
:±5%
