TH2683A Operation Manual
Ver.1.3
25
4.1.8
HANDLER VCC
This function is used to control the VCC selection for handler interface of the instrument.
Steps for setting the HANDLER VCC:
Touch
HANDLER VCC
, the following soft key zone will be displayed:
INTER
It is used for setting the Handler interface powered by internal VCC.
EXTER
It is used for setting the Handler interface powered by external VCC.
You can touch soft key zone to set corresponding functions.
4.1.9
Setting Time and Date
This function is used for setting the correct time of the local time zone.
For example: 9 o’clock 13 minute and 25 second a.m. on November 12, 2010 will be shown as
10
‐
11
‐
12 09:13:25.
Operations are as follows: Touch the time zone to be modified, the following items will be
displayed.
↑↑
（
+ +
）
Touch this key and then the time will increase rapidly by 5.
↑
（
+
）
Touch this key and then the time will increase by 1.
↓
（
-
）
Touch this key and then the instrument will decrease by 1.
↓↓
（
- -
）
Touch this key and then the instrument will decrease rapidly by 5.
4.2
<File Manage>
TH2683A series can save parameters that are set by user to the internal non
‐
volatile memory in
the file format. User can load the file to use these parameters instead of resetting.
This section will introduce the information about the function of Save/Recall.
Notation Explanation:
E: Abbreviation of External, representing external memory, like U disk.
I: Abbreviation of Internal, representing internal memory, like internal Flash of TH2683A.
4.2.1
Introduction to Save/Recall
By the function of save/recall, user can save measurement results and configuration information
to TH2683A internal Flash or external U disk; meanwhile user can recall data from TH2683A
internal Flash or external U disk.
