TH2683A Operation Manual
Ver.1.3
6
This zone displays the function menu corresponding to the cursor
‐
located zone.
4.
Result display
This zone displays the measurement result and the time of each test procedures (counting down).
5.
Prompt information
This zone displays all prompt information.
6.
Bin display
This zone displays sorting results of bins (
when sorting function is ON
).
7.
Warning sign
This zone is used to blinking display some warning information, for example, when HV is
displayed, it is warning that there is high voltage in test terminal. The instrument user should be
careful.
2.4
Introduction to Buttons on Front Panel
2.4.1
[MEAS]
Press <MEAS> to enter into display homepage. Selectable functions on this page are shown as
follows:
<MEAS SETUP>
<SYSTEM SETUP>
<FILE SETUP>
<SORTING SETUP>
<START SAVING>
2.4.2
[SYSTEM]
Press the [SYSTEM] button to enter into the <SYSTEM SETUP> page; the setup items of system
can be changed on this page.
2.5
Simple Operation
Simple operation steps for TH2683A:
Use [MEAS], [SYSTEM] or [FILE] or soft keys to enter into the page required to enter. (Refer
to figure 2
‐
5)
Use arrow buttons ([
←
] [
↑
] [
→
] [
↓
]) to move the cursor to desired zone.
When the cursor is moved to a soft key zone, press ENTER to confirm the selection. If it is
required to input a number or a file name, use the keyboard to input and press ENTER to
finish entry. You can use arrow buttons to select a number or a letter.
NOTE: DO NOT use acute units or nails to touch the screen. Doing so will cause damage
to the screen, our company shall not be liable to this case.
