Toledo PWi Forging, User Manual

Page: 42 / 92

PWi Forging User’s Manual
Doc #17663 Rev A Page
Toledo Integrated Systems
40
To change setpoints
1) Push to enter change mode. Station 1 is then selected.
2) Push to select the desired station.
3) Push or to change the value, or
Push or to change in a larger increment.
4) Push to accept the change (the next station will be selected), or push to cancel
the change.
5) Repeat from Step 2 to make changes on other stations.
6) Push to exit change mode.
Note:
To bypass a station’s setpoint, change the station’s setpoint % to zero. For example, to
disable reverse alarms for station 4, change the REV-% for station 4 to zero.
To view corner tonnage distribution
1) Push or until the center menu shows CORNR .
2) The peak tonnage values for each channel are shown in the associated corners of the
LCD, with the total displayed in the center.