maskine med til Deres lokale Toledo-forhandler. Der vil
maskinen blive bearbejdet på miljøvenlig vis.
GARANTI
Læs det separat vedlagte garantikort for garantibetingel-
serne.
C
l
E
l
■
KONFORMITETSERKLÆRING
(DK)
Vi erklærer at under almindeligt ansvar, at dette
produkt er i overenstemmelse med følgende
normer eller normative dokumenter
EN50144-1, EN50144-2-4. EN55014-1, EN55014-2,
EN61000-3-2, EN61000-3-3
i henhold til bestemmelserne i direktiverne:
98/37/EØF, 73/23/EØF
89/336/EØF
01-05-2001
GENEMUIDEN NL
G.M. Ensing
Quality department
Toledo
33
Grip
The use of the belt sander is made easier because of the
two grips one on the front side and one on the back. Th-
rough that you can hold the machine with two hands, you
have a better control of the machine and there is less risk to
becoming in touch with the moving parts. Hold the belt
sander always with both hands.
Operating instructions:
Make sure that the machine has reached its full speed be-
fore placing the machine on the work piece. This will pre-
vent an overload of the machine.
For sanding wood, place the machine approximately 15°
out of the grains of the wood. Move the belt sander conti-
nuous over the work piece.
TROUBLESHOOTING
In case the belt sander does not work well, we give you so-
me possible causes and solutions.
1. The electromotor gets hot:
The cool ventilation slots in the motor are stopped up
with dirt
-
Clean the cool ventilation slots
The motor is defect
-
Have your belt sander repaired or checked by your
local Toledo dealer
2. The connected machine does not work:
Interruption in the mains connection
-
Check mains connection for fracture
-
Have your belt sander repaired or checked by your
local Toledo dealer
3. The dust is not absorbed:
This can be caused by a stopped up dust extraction
-
Clean your dust collection opening
Repairing of electric appliances may be carried
out only by experts.
4
Toledo
