77
INSPECTION AND MAINTENANCE
10
Checking and Refilling Oil in the
Power Trim & Tilt.
①
Check the oil level of the reservoir
tank as shown on the right while
the tank is kept in a vertical
position. Tilt the engine up to
check the oil level in the tank.
Remove the oil cap by turning
counter-clockwise, then check if
the oil level reaches the bottom
line of the plug hole.
!
WARNING
●
Be sure that outboard motor is
secured to transom or service
stand, or accidental drop or fall of
outboard motor could lead to severe
personal injury.
●
Be sure to lock outboard motor if
it is tilted up, or accidental fall of
outboard motor could lead to severe
personal injury.
●
Do not go under outboard motor
tilted up and locked, or accidental
fall of outboard motor could lead to
severe personal injury.
30
・
40
・
50
Oil cap
Oil level
75
・
90
・
115
Oil cap
Oil
level
You may be injured due to high engine
temperatures if you fill engine oil just
after stopping. Changing engine oil
should be done after the engine has
been cooled.
!
CAUTION
Notes
●
If any amount of water is found in
engine oil, making it milky white,
consult dealer.
●
If engine oil is contaminated with
fuel, emitting strong fuel smell,
consult dealer.
●
Do not overfill engine oil, or engine
oil could leak and/or engine could be
damaged. If engine oil level is over
upper limit marks of oil gauge, drain
oil to level lower than upper limit.
●
Be sure that outboard motor is in
upright and level position when
checking or changing oil.
●
Stop engine immediately if low oil
pressure warning lamp is lit or oil
leak is found, or engine could be
severely damaged. Consult dealer.
!
CAUTION
OM_E_MD30B2-115A2_body_111213.indd 77
11/12/13 13:07
