44
ENGINE OPERATION
6
Preparations
Except for USA and Canada model
(regular tank)
①
Full open the air vent screw on the
tank cap.
Air vent Screw
For USA and Canada model
(EPA approved tank)
①
Full open the air vent screw on the
tank cap and turn the tank cap
until it contacts the tab lock. Close
the tank cap after completely re-
leasing pressure.
Air vent Screw
Tab lock
②
For the 30, 40 and 50 models,
insert the fuel connector into the
connector in the engine side.
30 · 40 · 50
For the 75, 90 and 115 model,
remove the cap from the fuel hose
nipple and then connect the hose
coming from the fuel tank.
After connection, be sure to fasten
the hose tightly with a hose band
or the like.
75
・
90
・
115
Cap
Fuel hose nipple
Fuel hose in fuel tank side
ENGINE OPERATION
1. Starting
Note
The engine will not start unless
the switch lock has been properly
connected into the emergency stop
switch.
!
WARNING
In case engine starts in gear, do not
start cruising. Stop engine immediately
and consult an authorized dealer.
!
WARNING
Do not operate the engine with gear
case out of water.
Severe personal injury, or engine
damage will result.
Never fill up portable fuel tanks on board
to avoid fire or explosion resulting from
spilled gasoline. If gasoline is ever spilled
on board, wipe it up thoroughly. Fuel
tanks must always be filled up on land.
!
CAUTION
OM_E_MD30B2-115A2_body_111213.indd 44
11/12/13 13:07
