manualshive.com logo in svg

Toa VP-2241, Instruction Manual

Share
Download
Toa VP-2241 Instruction Manual Download Page 211

Chapter 8:  INSTALLATION AND SETTING PROCEDURES (HARDWARE)

3. VX-2000Sf, VX-200SZ , VX-200SP, VX-200SI , VX-200SO, AND VX-200SE 

8-33

3.7. Installing Modules (VX-200SZ, VX-200SP, VX-200SI, and VX-200SO) 
       in the VX-2000SF Frame

Notes

• 

The slot number and module type to be installed must be identical to those designated by the Pc software.

• 

cover idle slots with the supplied blank panels to prevent dust from getting into the equipment.

 

Step 1. 

Align the module with the rails inside the VX-2000Sf frame, then push the module in to plug its 
connector strip securely into the VX-2000Sf's internal connector.

 

Step 2. 

Tighten both the top and bottom screws.

Blank panel
(supplied with the VX-2000SF)

Machine screw M3 x 6
(supplied with the VX-2000SF)

Summary of Contents for VP-2241









































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands