Toa VP-2241, Instruction Manual

Page: 124 / 328

Chapter 7: PC SOFTWARE OFFLINE SETTINGS
4. ScrEEN AND mENu DEScrIPTIONS
7-9
New creates a new system setting file.
Open Opens an existing system setting file.
Properties changes system information.
Print used to select and print the setting contents of the system setting file.
Exit Exits the VX-2000 setting software.
4.2. Menu
• File
Zoom Zooms the screen. (150%, 125%, 100%, 75%, 50%)
View Provides an overview window to be used as an on-screen navigator
with the entire area map.
Toolbar Enables or disables the toolbar display.
Status Bar Enables or disables the status bar display.
• Display
General Settings Performs date, time, and communication port settings.
Initial Impedance Settings Initialises the output module VX-200SZ.
configuration check checks that the system setting file matches the actual equipment
configuration.
connection check*
2
checks that equipment is correctly connected.
monitor Operation check*
2
checks the monitor function for correct operation.
log reads the VX-2000's log file into a Pc and displays it.
• System*
1
• Communications*
1
Indicates the version numbers of the VX-2000 setting software and
VX-2000 firmware.
Version
• Help*
1
• Edit
*
1
On-line menu items. for functions and methods to use, refer to chapters 10 and 11 .
*
2
These functions apply to the VX-2000 Setting Software Version 2.0 or later.
configurations Setting mode Sets the equipment configuration.
System Setting mode Sets broadcasting priorities and initial volume.
Operation Setting mode Sets the emergency broadcast pattern, individual broadcast patterns,
and failure output patterns to be monitored.
Activation Setting mode Sets the purpose of use of the control input.
rm Properties Setting End closes all rm (remote microphone) properties setting windows.
Download [Pc VX] loads the system setting file created by a Pc into the VX-2000.
upload [Pc VX]*
2
reads the VX-2000 system setting file to a Pc.