Toa VP-2241, Instruction Manual

Page: 10 / 328

10
SAFETY PRECAUTIONS
• Be sure to read the instructions in this section carefully before use.
• Make sure to observe the instructions in this manual as the conventions of safety symbols and messages
regarded as very important precautions are included.
• We also recommend you keep this instruction manual handy for future reference.
Safety Symbol and Message Conventions
Safety symbols and messages described below are used in this manual to prevent bodily injury and property
damage which could result from mishandling. Before operating your product, read this manual first and
understand the safety symbols and messages so you are thoroughly aware of the potential safety hazards.
[All units]
• To prevent a fire or electric shock, never open nor remove the unit case as there are high voltage components
inside the unit. refer all servicing to your nearest TOA dealer.
• Do not place cups, bowls, or other containers of liquid or metallic objects on top of the unit. If they accidentally
spill into the unit, this may cause a fire or electric shock.
[RM-200XF, RM-200X, RM-210 only]
• Avoid installing or mounting the unit in unstable locations, such as on a rickety table or a slanted surface.
Doing so may result in the unit falling down and causing personal injury and/or property damage.
• Install the unit only in a location that can structurally support the weight of the unit and the mounting bracket.
Doing otherwise may result in the unit falling down and causing personal injury and/or property damage.
[VX-2000DS, VX-3000DS, VX-200PS only]
• Do not expose the unit to rain or an environment where it may be splashed by water or other liquids, as doing
so may result in fire or electric shock.
• Use the unit only with the voltage specified on the unit. Using a voltage higher than that which is specified
may result in fire or electric shock.
• Do not cut, kink, otherwise damage nor modify the power supply cord. In addition, avoid using the power cord
in close proximity to heaters, and never place heavy objects -- including the unit itself -- on the power cord,
as doing so may result in fire or electric shock.
• Should the following irregularity be found during use, immediately switch off the power, disconnect the power
supply plug from the Ac outlet and contact your nearest TOA dealer. make no further attempt to operate the
unit in this condition as this may cause fire or electric shock.
· If you detect smoke or a strange smell coming from the unit.
· If water or any metallic object gets into the unit
· If the unit falls, or the unit case breaks
· If the power supply cord is damaged (exposure of the core, disconnection, etc.)
· If it is malfunctioning (no tone sounds.)
• Do not insert nor drop metallic objects or flammable materials into the unit, as this may result in fire or electric
shock.
• Do not touch a plug during thunder and lightning, as this may result in electric shock.
[VX-2000DS, VX-3000DS only]
• To avoid electric shock, disconnect both the AC plug and battery terminals before performing component
installation or service.
[VX-200SP, VX-200SZ, VP-2000 series amplifiers, VP-3000 series amplifiers only]
• Components or parts having the symbol "
" are live and dangerous. refer connections of these terminals to
a professional electrical contractor to avoid electric shocks.
[VX-2000SF, VP-2000 series amplifiers, VP-3000 series amplifiers only]
• Do not insert nor drop metallic objects or flammable materials into the unit, as this may result in fire or electric
shock.
Indicates a potentially hazardous situation which, if mishandled, could
result in death or serious personal injury.
WARNING