Toa VP-2241, Instruction Manual

Page: 148 / 328

Chapter 7: PC SOFTWARE OFFLINE SETTINGS
8. SySTEm SETTING mODE
7-33
8.1.3. General (General-Purpose Broadcast)
clicking on the [General] button displays all remote microphones set for general-purpose broadcast only in the
[rm properties] window, general-purpose EV messages, and sound sources not set for BGm*. All are initially
displayed with the same level of priority.
* When the "use this source for BGm" checkbox in the 900 module setting window is not ticked, the sound
source broadcast takes precedence over BGm sources. for the VX-2000 input slot settings, refer to p. 7-21 .
Step 1. Select a remote microphone, general-purpose message, or sound source, and change its priority by
pressing the up ( ) and Down ( ) buttons.
Step 2.
If the same priority level is assigned to more than one sound source, select either [FIFO] (first in, first
out) or [LIFO] (last in, first out) priority settings in case simultaneous broadcasts are made.
• FIFO: Priority is given to the first broadcast made. Subsequent broadcasts cannot be made until the
first all-zone broadcast is completed.
• LIFO: Priority is given to the most recent broadcast, which overrides any Remote Microphone,
general-purpose message or sound source broadcasts currently in progress .