Toa VP-2241, Instruction Manual

Page: 102 / 328

Chapter 5: OPERATION
3. GENErAl-PurPOSE BrOADcAST
5-30
3.4. Interrupt Broadcasts
Interrupt broadcasts can be activated from the control input or internal timer.
Preprogrammed interrupt broadcast patterns are recalled to make broadcasts during activation.
Notes
• To make the Interrupt broadcast to a currently broadcast zone, the interrupt broadcast source should be
higher in priority than the current broadcast or should be assigned the lIfO priority if both broadcasts are the
same in priority level. for the priority settings, refer to
p. 7-30 .
• If the assigned input sources are the same, broadcasts are made to every output zone set in all recalled
patterns.
• If the assigned input sources are different, but the recalled pattern output zones are duplicated, the input
source assigned the highest priority is broadcast to all duplicated zones, while other recalled sources are
broadcast to the corresponding output zones that are not among the duplicated zones.
[Activation by means of the control inputs]
The Interrupt broadcast having its preset pattern overrides the current broadcast while the corresponding
control input is activated.
[Change by means of the internal timer]
The Interrupt broadcast having its preset pattern overrides the current broadcast during the duration from the
start time to the end time set by the internal timer.