Toa VP-2241, Instruction Manual

Page: 183 / 328

Chapter 8: INSTALLATION AND SETTING PROCEDURES (HARDWARE)
1. rm-200Xf AND rm-200X mIcrOPHONES
8-5
1.1.4. Compression settings (Switch 6)
When the compression circuitry is set to ON, broadcasts can be made without voice distortion, even during loud
outbursts. compression is factory-preset to ON.
1.1.5. Enable/Disable switching for the Emergency button and Function key 2
(Switches 7 and 8, and RM-200XF only)
FIREMAN'S MICROPHONE
RM-200XF
MIC SP CPU
OFF ON
Emergency button
[RM-200XF Top]
Function key 2
Both functions of the Emergency button and function key 2 are factory-preset for "Off" (Enable).
Selecting "ON" disables the Emergency button or function key 2 operation, allowing it only to function as an
indicator.
use this setting, for example, when Emergency activation from the rm-200Xf is not desired but only emergency
mode indication is needed.
for details of the remote microphone indications, refer to
p. 4-7 .
Operation
The Emergency button operates normally.
The Emergency button will not perform Emergency activation, but
provides only an indication for emergency mode.
The function key 2 operates normally.
The function key 2 will not operate, but provides the indications of the
assigned function.
Example:
When the function "Evacuation EV message recall" is
assigned, the indication provides the status of the evacuation
EV message broadcast.
Setting DIP Switch
7
8
function
Off
ON
Off
ON