manualshive.com logo in svg

Toa D-001R, User Manual, Page: 40 / 56

Share
Download
Toa D-001R User Manual Download Page 40

7. 

Controlling the 9000 Series 

 
There are several ways of controlling the 9000 Series: 

1. Front panel 
2. Remote Control (Volume Pot, ZM-9001, ZM-9002) 
3. Contact Closure (ZM-9003, remote contacts) 
4. Serial Control (PC, third-party control system) 

 

a. How do I control the 9000 Series from the front panel? 

All control of the 9000 Series may be accessed on the front panel. While this is a useful 
option (for lack of any external control), it should be noted that control via remote or serial 
connection is more convenient. Front panel control is limited to Memory Recall & Volume 
functions. 

 
b. How do I control the 9000 Series using Remote Control inputs? 

   
Using the two Remote Input 2-wire terminals on the 9000 Mainframe:

 (ZM-9001, ZM-

9002, Volume pot).  
 

ZM-9001:

 This controller operates on one of the 2 two-wire remote inputs 

on the 9000 Series’ back panel. This version provides 6 assignable contact 
closure-type buttons, which may be programmed to control memory 
selection or volume up/volume down (incrementally) for any input or input 
channel. The assignments for this control may be found in the REMOTE 
programming page in the GUI or the unit’s UTILITY menu. 
 

ZM-9002:

 This controller also operates on one of the 2 two-wire remote 

inputs on the 9000 Series’ back panel. This version provides 4 assignable 
contact closure-type buttons, which may be programmed to control 
memory selection or volume up/volume down (incrementally) for any input 
or output channel. It also features a continuously variable knob, which may 
be assigned to control volume. The assignments for this control may be 
found in the REMOTE programming page in the GUI or the unit’s UTILITY 
menu. 

 
 

10K

Ω

 pot:

 Works with either of the 2 two-wire remote inputs and may be 

chosen in lieu of the ZM controllers, when only a simple volume control is 
required. The assignments for this control may be found in the REMOTE 
programming page in the GUI or the 9000 unit’s UTILITY menu. 

 
c. How do I control the 9000 Series using Serial Control?  
 

The 9000 Series may be controlled using the 9-pin (RS-232C) serial connection on the rear 
panel. There are two ways in which this may be implemented: 
 

1. Via a third party controller: AMX, Crestron, etc. RS-232C protocols are available on our 

website for those who wish to program their own drivers for the 9000 Series. AMX & 

 

40

Summary of Contents for D-001R

























































Reviews:

No comments