c.
Pressing the “
X
” again highlight the parameter value portion of the menu. Once a
specific parameter has been selected, another channel may also be selected for
adjustment of that same parameter (assuming similar module type).
d.
Adjusting the Parameter Knob changes the value of the selected parameter.
e.
Pressing the “ESC/BACK” key reverts to the previous edit page or escapes the edit
menu.
f.
Pressing the “MEMORY” button accesses the preset memory register.
g.
Adjusting the PARAMETER” knob selects the memory slot to be used.
h.
Pressing “ENTER” stores the current settings to that scene.
i.
Pressing the “UTILITY” button accesses the utility menu, where global or special
functions may be edited. These settings are not stored with presets, but with
configuration templates.
j.
The Utility menu is navigated the same way as the main edit menu, but to escape,
press the “MEMORY” button and any channel button.
II. In Matrix Mode?
c
d
a, e
b. (blank screen)
b
a.
To enter, delete the display indication by pressing the
MEMORY
key (screen goes
blank),
b.
Then holding down the
UTILITY
menu key for 2 seconds or more displays the
setting menu screen.
Note:
You cannot enter the setting mode as long as any indication is displayed in
the upper line of the VFD screen.
c.
Then, using the navigation keys
(
S
/
T
/
W
/
X
),
items may be selected in the display
Examples of using the
Left
and
Right
arrow keys:
When moving the setting screen:
SELECT INPUT CH
INPUT-SETTING
15