Toa D-001R User Manual Download Page 30

Page: 30 / 56

h. Volume Settings Page (D-001T, D-001R, Mainframe Outs,

T-001T)

Checking the box turns

Phantom Power

On/Off for individual Channels (D-001T Input

only)

Adjusts the

Input Sensitivity

for each channel, from -10 (line level) to -60dB (mic level)

(D-001T, D-001R Input only). Not available for other types of inputs.

Adjusts

Bass & Treble

for each input (+/- 12dB) (D-001T, D-001R, Main Frame & T-001T

outputs only)

Checking this box activates the

Loudness

function for each channel. This is useful for

boosting background music played at lower volumes and affects mainly the bass range.
(D-001T, D-001R, Main Frame & T-001T outputs only)

. This number indicates the

fader’s current dB Reference Level

(OFF, -70dB - +10dB) (D-

001T, D-001R, Main Frame & T-001T outputs only)

Fader Controls

. These may slide up or down to adjust the desired fader setting. The dB

reference level (#5) will change accordingly).

POWER ON

(MATRIX Mode): This setting (once uploaded to the 9000 unit) determines

whether the fader adjustments will

SAVE

DELETE

, upon power OFF/ON cycle. This

also requires that the

MEMORY

button be pressed on the unit.

ADJUST

function allows transmission of new settings to a serially connected 9000 unit.

Making the assignment/level adjustment and clicking on this button is similar to making an
adjustment on the front panel, but is being done remotely.

CLOSE.

Closes the Volume Settings window.

Please note: Many of these functions are present in both Input &

Output fader pages. Some on Input page only.

Volume Control ONLY

available for ZP-001T & 900 Series Input modules. AN-001T cannot be
controlled from this page.

Summary of Contents for D-001R

























































Search results

Summary of Contents for D-001R

Reviews:

Toa D-001R, User Manual, Page: 30 / 56

Search results

Summary of Contents for D-001R

Reviews: