manualshive.com logo in svg

Toa D-001R, User Manual, Page: 21 / 56

Share
Download
Toa D-001R User Manual Download Page 21

4. Programming from the GUI Software 

 
Programming and configuration of the 9000 Series is fast and intuitive using the GUI 
(Graphical User Interface) software. Using the GUI, a 9000 setup may be programmed 
entirely off-line, without a unit present and later, settings may be uploaded to one or more 
units. Be aware that there are similarities and also differences with respect to how the GUI 
appears and with respect to the various functions in each of the operating modes. Here we 
will outline these similarities and differences for each of the setting pages or “windows”.  
 
When you first launch the GUI application, the Main setup window appears: This window is 
generally the same for both MIXER and MATRIX mode, except that the SCENE select box 
(8) in MIXER mode (lower right), will be labeled (EVENT) in Matrix mode. 

 
a. Mainframe Configuration Settings Page 
 
 
 

2a

8 

6 

5

7

4 

3

2 

1 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

1. Model/Mode Select

: The first thing you must do after launching this application is tell 

it what model you are working with (a drop down with the various versions  of 9000, 
including M9000  will appear), followed by the mode you are operating in (MIXER or 
MATRIX). 

 

21

     

 

L

 Requires 9000 firmware v2.0 or higher 

Summary of Contents for D-001R

























































Reviews:

No comments