Spinnerstraat 15 | Postfach 6 | 7481 KJ Haaksbergen | die Niederlande | Telefon: +31(0)53 573 22 55 | Email: [email protected]
3/16
Technische Änderungen vorbehalten | Aus diesen Informationen können keine Rechte abgeleitet werden
2 General
2.1 Basic configuration
Important note: Before installation check the shipment for completeness and possible transport damage. In case of complaints,
these must be documented and reported immediately.
The pre-assembled ACE TCB-O is equipped and pre-
assembled in the following form. The listed components are
included in the scope of delivery for the fully equipped
variant. In this manual we use this variant as reference.
Base
Cover
Splice Tray Holder, pivotable
Routing block
SC-Splice tray with Crimp splice protection holder
Splitter tray with splitter
SC-Splice tray with Crimp splice protection holder
Patch tray
LC/APC duplex adapter
LC/APC Patch cable pre-assembled and routed from the
patchfield box to the parking panel
LC/APC Pigtail pre-assembled and routed to the
SC-splice tray
LC/APC Pigtail color coded, pre-assembled inside the
subscriber patch tray
Entry box
Tube Clip
Cover Entry box
Patchfield box with Cover
LC-APC duplex adapter
Parking panel
Mounting material (not scope of the shipment)
Installation instruction (no figure)
Note: Splice protection elements are not scope of the
shipment and must be ordered separately as an accessory.
Note: Picture f.e., example configuration
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
1
2
3
4
17
6
5
7
8
9
10
12
3
8
11
10
13
14
15
16
18