FITTING INSTRUCTIONS
Product:
T13 Outback Deluxe Frontal Protection System
Vehicle:
Holden Colorado 2016+
Part No.
070SB13L32R
For product warranty, please refer to our website, www.tjm.com.au
File: F-13409
Page 20 of 28
28/03/2017
68.
Fasten the rear of the centre guard and OE
guard to the winch frame using M8 x 1.25 x
35mm Hex Head bolts (2), M8 Spring Washers
(2) and 5/16” x Ø1
-
1/4” Flat Washers (2).
If no winch has been fitted, proceed to
69.
Install and tighten the front winch bolts,
supplied with winch.
Proceed to step 71
70.
Secure the centre guard at the indicated
location using M10 x 1.25 x 30mm Hex bolts
(2), M10 x Ø30mm Washers and M10 Flange
nuts.
71.
Fit the supplied pinch weld to the top edge of
the body cover panels, as shown.
