FITTING INSTRUCTIONS
Product:
T13 Outback Deluxe Frontal Protection System
Vehicle:
Holden Colorado 2016+
Part No.
070SB13L32R
For product warranty, please refer to our website, www.tjm.com.au
File: F-13409
Page 24 of 28
28/03/2017
87.
Clean mounting surfaces so they are free of
oils & residues, then affix the parking sensor
housings to the rear side of the FPS.
IF PARKING SENSORS ARE FITTED, ENSURE
THEY ARE POSITIONED AND ORIENTED
ACCORDING TO THE NOTES MADE IN STEP
STEP 88 APPLIES ONLY IF A WINCH IS
FITTED
88.
Using the fasteners supplied with the winch,
secure the fairlead to the FPS.
PROCEED TO STEP 91
89.
Fit fairlead cover if not fitting a winch using
M6 x 1.0 x 20mm hex bolts (4), M6 Spring
Washers (4) and
1/4" x Ø5/8” Flat Washers
(4) in the indicated locations on both sides.
