FITTING INSTRUCTIONS
Product:
T13 Outback Deluxe Frontal Protection System
Vehicle:
Holden Colorado 2016+
Part No.
070SB13L32R
For product warranty, please refer to our website, www.tjm.com.au
File: F-13409
Page 13 of 28
28/03/2017
38.
Loosely secure the chassis mount and chassis
rail bracket in place, using an M10 x 1.25 x
80mm hex bolt (1), M10 x Ø30mm flat
washers (2), M10 nyloc nut (1) & M10 x 50mm
long tube spacer.
39.
Repeat steps 34 to 38 for the opposite side of
the vehicle then tighten fasteners to the
torque specified on page 1.
40.
Loosely secure the winch frame in place at the
indicated location using M10 x 1.25 x 30mm
hex bolts (2), M10 spring washers (2), and
M10 Washer Plates (2) .
41.
On both sides of the winch frame, insert a
4mm spacer (shown below) between the
chassis cross member and the lower winch
frame mount.
RHS SHOWN
STEP 38
RHS SHOWN
STEP 41
