FITTING INSTRUCTIONS
Product:
T13 Outback Deluxe Frontal Protection System
Vehicle:
Holden Colorado 2016+
Part No.
070SB13L32R
For product warranty, please refer to our website, www.tjm.com.au
File: F-13409
Page 19 of 28
28/03/2017
64.
Re-fit the OE underbody guards as per their
original installation, use the retained OE
fasteners for all mounting points except for
the indicated position.
65.
Fit the supplied logo backing plate to the
inside of the centre guard, as shown, using M6
x 1.0 x 20mm button head bolts (2), 1/4" x
Ø5/8” Flat Washer
s (2) and M6 flange nuts
(2).
66.
Position the centre guard as shown opposite,
sandwiching the OE guard between the centre
guard and winch frame.
67.
Fasten the front of the centre guard to the
winch frame using M6 x 1.0 x 20mm hex head
bolts (2), M6 spring washers (2) and 1/4" x
Ø5/8” Flat Washers (
2).
