FITTING INSTRUCTIONS
Product:
T13 Outback Deluxe Frontal Protection System
Vehicle:
Holden Colorado 2016+
Part No.
070SB13L32R
For product warranty, please refer to our website, www.tjm.com.au
File: F-13409
Page 12 of 28
28/03/2017
34.
Position the chassis mount as shown and
loosely secure at the indicated location using
an M14 x 1.5 x 45mm hex bolt (1),
9/16” x
Ø1-
1/8” flat washers (2) & M14 nyloc nut (1).
35.
Position an M10 x 1.25 x 100mm hex bolt (1)
& M10 x Ø30mm flat washer (1) at the
indicated location.
36.
Position an M10 x 66mm long tube spacer
over the fastener from the previous step, then
loosely secure the rear of the chassis mount in
place, using the fasteners from the previous
step, an M10 x Ø30mm flat washer (1) & M10
nyloc nut (1).
37.
Position a chassis rail bracket over the inside
of the chassis rail as shown opposite.
RHS SHOWN
RHS SHOWN
STEP 35
RHS SHOWN
