17
and of an appropriate wire gauge for the application. Plug the other end of the power cord
into the electrical port on the control valve.
Note: The electrical port on the control valve is
located on the right side of the valve (when you are
facing the control panel), just behind the tab used
to remove the valve cover. It is a bit tricky to find.
Once plugged in, the touch screen on the control
valve will illuminate. The control valve may need
to reset to the home position when it is powered
up. If it does, the motor will run for a few seconds.
Optional: The touch screen is shipped with a protective plastic film that can be peeled off.
The following is the primary “Home Screen” or Main Menu:
Items displayed in blue or grey can be touched to edit or obtain more information. Items
displayed in black are for information purposes only and cannot be selected.
In the top left corner of the screen, you will find the current day of the week and time.
In the top right corner, there is an indicator that will tell you when the next “regeneration” or
backwash cycle is scheduled to occur.
