25
CHANGING BASIC SETTINGS
The Settings Mode allows you to set the frequency of the back flush and the time of day that
the flush cycles will take place. You can also adjust the brightness of the touch screen
display.
To enter the Settings Mode, touch the
SETTINGS ICON in the main menu at the
bottom of the home screen. The following
screen will appear:
Day Override
The default setting is 10 days. There may be
instances where more frequent backwash is
required. For instance, if your water
consumption increases considerably, or if your
feed water conditions temporarily worsen.
Backwash Time
The “regen. time” is the time of day that the automatic backwash cycle is scheduled to occur.
We recommend that the backwash be carried out in the middle of the night or other time
where it is unlikely that water will be used for other purposes.
To adjust the time of day that the flush cycles will occur, touch “regen. time” and two blue
arrows will appear. Touch the arrow on the left to adjust to an earlier time, and the arrow on
the right to adjust to a later time.
When you are satisfied that all of the settings are correct, press the CHECKMARK ICON in the
bottom right corner of the screen. To cancel your changes and return to the home screen,
press the “X” ICON at any time.
Touch Screen Display Brightness
You can adjust the brightness of your touch screen by touching the BRIGHTNESS ICON.
The brightness can be set on a scale from 0 to 10 with 10 being the brightest. The default
setting is 10. To change the setting, touch “power,” then use the 2 blue arrows to increase or
