4
PURPOSE/ APPLICABILITY
This manual is intended to provide installation, operating and service information on Titan Air’s
TAH-Indirect Fired equipment.
A packet of reference materials for a specific equipment (tracked by its Serial Number) is
typically included with this Operating and Service Manual. The reference materials include
Equipment Specifications, Parts Lists, Gas Train and Burner Specifications, Electrical Schematic,
and a Sequence of Operation. Review the reference materials for a specific equipment and note
any optional equipment or controls which are not specifically addressed in this manual prior to
attempting start-up or service work
The information and recommendations contained in this publication are based on general
observation and are not intended to supplant requirements of federal, state or local codes having
jurisdiction. These codes should be reviewed before installation of equipment. All equipment must
be installed in accordance with national, state or local codes.
It is the responsibility of the purchaser at the time of order, to specify any and all code or
insurance requirements that may dictate the addition of components to the equipment in order to
comply with those requirements.
Only qualified personnel who have experience with the installation and operation of industrial/
commercial direct fired equipment should attempt to service Titan Air equipment.
Titan Air equipment can be equipped with Hot Water or Steam heating coils, Chilled Water
cooling coils, DX cooling coils, and Ammonia cooling coils. These components will be certified by
accepted industry standard testing agencies. Hydronic, DX, and ammonia coils will typically be ARI
410 certified.
