17
2. Apply provided caulk tape to one side of
the joint to be assembled. Apply tape toward the
outside of the bolt pattern as seen below.
Ensure there are no gaps in the caulk tape
when applying.
Do not
cover the bolt holes with
caulk tape.
3. Locate and match each section letter on
the service side of the unit with the
corresponding letter on the other section. In
addition, also refer to the unit submittal drawing
for proper assembly order.
4. Lift blower section and center it over
burner section with the unit section letters lined
up. After blower section is set in place use drift
punches to line up seam bolt patterns. Fasten
sections together using the provided bolts, nuts
and washers filling all of the seam holes.
Caulk Tape
