background image

 

7

 

SAFETY PRECAUTIONS

HYDRA X

1.4 

GASOLINE ENGINE SAFETY

1.  Gas engines are designed to give safe and dependable 

service if operated according to instructions.  Read and 

understand the engine manufacturer’s Owner’s Manual 

before operating the engine.  Failure to do so could result 

in personal injury or equipment damage.

2.  To prevent fire hazards and to provide adequate 

ventilation, keep the engine at least 1 meter (3 feet) away 

from buildings and other equipment during operation.  Do 

not place flammable objects close to the engine.

3.  People who are not operating the device must stay away 

from the area of operation due to a possibility of burns from 

hot engine components or injury from any equipment the 

engine may be used to operate. 

4.  Know how to stop the engine quickly, and understand the 

operation of all controls.  Never permit anyone to operate 

the engine without proper instructions. 

5.  Gasoline is extremely flammable and is explosive under 

certain conditions. 

6.  Refuel in a well-ventilated area with the engine stopped.  

Do not smoke or allow flames or sparks in the refueling 

area or where gasoline is stored. 

7.  Do not overfill the fuel tank.  After refueling, make sure the 

tank cap is closed properly and securely. 

8.  Be careful not to spill fuel when refueling.  Fuel vapor or 

spilled fuel may ignite.  If any fuel is spilled, make sure the 

area is dry before starting the engine. 

9.  Never run the engine in an enclosed or confined area.  

Exhaust contains poisonous carbon monoxide gas; 

exposure may cause loss of consciousness and may lead 

to death. 

10.  The muffler becomes very hot during operation and 

remains hot for a while after stopping the engine.  Be 

careful not to touch the muffler while it is hot.  To avoid 

severe burns or fire hazards, let the engine cool before 

transporting it or storing it indoors. 

11.  Never ship/transport sprayer with gasoline in the tank.

1.5 

FUELING (GAS ENGINE)

Gasoline is extremely flammable and is explosive 

under certain conditions.

FUEL SPECIFICATIONS
Use automotive gasoline that has a pump octane number of 86 

or higher, or that has a research octane number of 91 or higher.  

Use of a lower octane gasoline can cause persistent “pinging” or 

heavy “spark knock” (a metallic rapping noise) which, if severe, 

can lead to engine damage. 

i

If “spark knock” or “pinging” occurs at a steady 

engine speed under normal load, change brands 

of gasoline.  If spark knock or pinging persists, 

consult an authorized dealer of the engine 

manufacturer.  Failure to do so is considered 

misuse, and damage caused by misuse is not 

covered by the engine manufacturer’s limited 

warranty. 
Occasionally you may experience light spark 

knock while operating under heavy loads.  This 

is no cause for concern, it simply means your 

engine is operating efficiently. 

• 

Unleaded fuel produces fewer engine and spark plug 

deposits and extends the life of the exhaust system 

components. 

• 

Never use stale or contaminated gasoline or an oil/gasoline 

mixture.  Avoid getting dirt, dust, or water in the fuel tank.

GASOLINES CONTAINING ALCOHOL
If you decide to use a gasoline containing alcohol (gasohol), be 

sure its octane rating is at least as high as that recommended 

by the engine manufacturer.  There are two types of “gasohol”: 

one containing ethanol, and the other containing methanol.  

Do not use gasohol that contains more than 10% ethanol.  Do 

not use gasoline containing methanol (methyl or wood alcohol) 

that does not also contain co-solvents and corrosion inhibitors 

for methanol.  Never use gasoline containing more than 5% 

methanol, even if it has co-solvents and corrosion inhibitors. 

i

Fuel system damage or engine performance 

problems resulting from the use of fuels that 

contain alcohol is not covered under the 

warranty.  The engine manufacturer cannot 

endorse the use of fuels containing methanol 

since evidence of their suitability is incomplete 

at this time.
Before buying gasoline from an unfamiliar 

station, try to find out if the gasoline contains 

alcohol.  If it does, confirm the type and 

percentage of alcohol used.  If you notice any 

undesirable operating characteristics while using 

a gasoline that contains alcohol, or one that you 

think contains alcohol, switch to a gasoline that 

you know does not contain alcohol. 

Summary of Contents for HYDRA X 4540



























































Reviews: