Titan Atrato 710, Instruction Manual

Page: 10 / 22

10
NOTE: the operation for Pin 6 and Pin 7 are identical with the exception of the
type of transistor output. These instructions are the same for Pin 7 except the
Pin 6 (PNP) would read Pin 7 (NPN).
PIN 6 (PNP):
Pin 6 can be configured as either an
output or an input but not both simultaneously. If one
input and one output is required the user must determine
whether they require a NPN or PNP output and use the
appropriate terminal for each action. The options are –
Not used Output Input .
PIN 7 (NPN): Pin 7 can be configured as either an
output or an input but not both simultaneously. If one
input and one output is required the user must determine
whether they require a NPN or PNP output and use the
appropriate terminal for each action. The options are –
Not used Output Input .
EXTERNAL CONNECTIONS
PIN 6 (PNP)/PIN 7 (NPN)
The contents of this box will change depending on the selection made in the External
connection box.
If OUTPUT is selected the check box options are:-
Pulse Single Flow Switch Dual Flow Switch Reverses Flow