Titan Atrato 710, Instruction Manual

Page: 16 / 22

16
The chart below shows the various display messages for various operating functions.
During operation only one message will be shown for each parameter.
Parameter Value Notes Function
Flow rate 2.5000 Litres per minute Units selected in configuration
Filtered flow rate 2.4981 Litres per minute This will lag flow rate
Total 16.95 Litres Total passed since last reset
Pin 6. Off Pin not being used
83.33Hz Output Pulses (2000 per Litre)
Frequency output for current flow rate @
2000 pulses/Litre
On Will turn off when rate below 2.7 Flow switch set to 3 L/Min 10% -ve flow.
Off Will turn on when rate above 3.3 Flow switch set to 3 L/Min 10% +ve flow.
Forward Direction of flow Reverse flow tab selected
Low Input logic level
Left push button selected will momentarily
show high when remotely operated
Low Input logic level
Right push button selected will momentarily
show high when remotely operated
Pin 7. Off Pin not being used
83.33Hz Output Pulses (2000 per Litre) Pulse output selected
On Will turn off when rate below 2.7 Flow switch set to 3 L/Min 10% -ve flow.
Off Will turn on when rate above 3.3 Flow switch set to 3 L/Min 10% +ve flow.
Forward Direction of flow Reverse flow tab selected
High Input logic level
Left push button selected will momentarily
show low when remotely operated
High Input logic level
Right push button selected will momentarily
show low when remotely operated
Relay Off Relay not being used
On Will turn off when rate below 2.8 Flow switch set to 3 L/Min 10% -ve flow.
Off Will turn on when rate above 3.4 Flow switch set to 3 L/Min 10% +ve flow.