17
PIN 7:
The display for “Pin 7” will function the same as “Pin 6” (see page 13).
RELAY:
If no function is set for the relay the Value column will show “Off” otherwise
it will display the function and its operating parameters.
BATCHING
If
Batch is selected in the “Display mode” the relay is automatically
OPTION:
assigned to the total display for batching pre-set volumes of liquid. The
preset batch size can be entered in the relay box. This value will be seen
on the LCD display and will count down when the left hand start button is
pressed. The batch can be interrupted by pressing the right hand button,
in the paused state a further press of the right button cancels the batch. If
you wish to continue the batch from the paused state the left hand button
continues the dispense from the point it was interrupted.
If an alternative batch size is required after the unit is disconnected from
the computer pressing both buttons together for 3 seconds will permit
the batch size to be altered by using the right hand key to increment the
digit that is flashing and the left hand button to advance to the next digit.
Holding the left button for 3 seconds enters the selected numbers and the
meter is ready to begin batching. Both buttons can be operated remotely
if required e.g. for remote start/stop signals.
ATRATO ADVANCED USER TAB
Summary of Contents for Atrato 710
Page 2: ...TM...
