background image

 

32 

Performance Series 1150e

Warranty

Titan Tool, Inc., (“Titan”) warrants that at the time of delivery to the original purchaser for use (“End User”), the equipment covered 

by this warranty is free from defects in material and workmanship.  With the exception of any special, limited, or extended warranty 

published by Titan, Titan’s obligation under this warranty is limited to replacing or repairing without charge those parts which, to Titan’s 

reasonable satisfaction, are shown to be defective within twelve (12) months after sale to the End User.  This warranty applies only 

when the unit is installed and operated in accordance with the recommendations and instructions of Titan.
This warranty does not apply in the case of damage or wear caused by abrasion, corrosion or misuse, negligence, accident, faulty 

installation, substitution of non-Titan component parts, or tampering with the unit in a manner to impair normal operation.

Defective parts are to be returned to an authorized Titan sales/service outlet.  All transportation charges, including return to the 

factory, if necessary, are to be borne and prepaid by the End User.  Repaired or replaced equipment will be returned to the End User 

transportation prepaid.

THERE IS NO OTHER EXPRESS WARRANTY.  TITAN HEREBY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES INCLUDING, 

BUT NOT LIMITED TO, THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, TO THE EXTENT 

PERMITTED BY LAW.  THE DURATION OF ANY IMPLIED WARRANTIES WHICH CANNOT BE DISCLAIMED IS LIMITED TO 

THE TIME PERIOD SPECIFIED IN THE EXPRESS WARRANTY.  IN NO CASE SHALL TITAN LIABILITY EXCEED THE AMOUNT 

OF THE PURCHASE PRICE.  LIABILITY FOR CONSEQUENTIAL, INCIDENTAL OR SPECIAL DAMAGES UNDER ANY AND ALL 

WARRANTIES IS EXCLUDED TO THE EXTENT PERMITTED BY LAW.
TITAN MAKES NO WARRANTY AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 

A PARTICULAR PURPOSE WITH RESPECT TO ACCESSORIES, EQUIPMENT, MATERIALS OR COMPONENTS SOLD BUT 

NOT MANUFACTURED BY TITAN.  THOSE ITEMS SOLD, BUT NOT MANUFACTURED BY TITAN (SUCH AS GAS ENGINES, 

SWITCHES, HOSES, ETC.) ARE SUBJECT TO THE WARRANTY, IF ANY, OF THEIR MANUFACTURER.  TITAN WILL PROVIDE 

THE PURCHASER WITH REASONABLE ASSISTANCE IN MAKING ANY CLAIM FOR BREACH OF THESE WARRANTIES.

Note on disposal:

In observance of the european Directive 2002/96/

eC on waste electrical and electronic equipment 

and implementation in accordance with national law, 

this product is not to be disposed of together with 

household waste material but must be recycled in an 

environmentally friendly way!

Titan or one of our dealers will take back your used 

Titan waste electrical or electronic equipment and will 

dispose of it for you in an environmentally friendly way. Please ask 

your local Titan service centre or dealer for details or contact us 

direct.

1770 Fernbrook Lane

Minneapolis, MN  55447

www.titantool.com/international

International

Summary of Contents for 558072

































Reviews: