PKD
18
/
57
3. Safety regulations
Failure to comply with the following safety instructions, in addition to errors in
handling the device, can result in serious injuries.
Be informed!
Read the operating manual
carefully
before
using
the
device.
Caution: Danger of crushing!
Do not insert fingers into the
pulley area.
Protect yourself!
Always wear eye, face and hand
protection
(cut-resistance
gloves) when working.
Caution:
Strap only objects to be
packed!
Make sure that no hands or
other body parts are between
the strap and the goods to be
packaged.
Attention: Strap can break!
The strap can break during
tightening! Do not stand in the
path of the strap. Make sure that
no one else is in the working
area.
Attention: Strap flies outward!
When cutting the strap, hold the
top part firmly and stand to the
side.
Attention:
The lower part of the
strap will fly outward.
Use
only
lifting
gear
that
complies
with
the
safety
regulations!
Use
original
connection
couplings!
Use only connection couplings
that comply with the safety
regulations.
Use only original TITAN
replacement parts!
The use of other than original
TITAN replacement parts will
void the warranty and all liability.
Only use original TITAN seals
chaps!
Do not exceed air pressure!
Never
exceed
the
max.
permissible air pressure of 6
bar.
Do not use gas or compressed
air cylinders!
Do not connect the tool to a gas
or compressed air cylinder.
The use of straps other than
recommended can result in
broken
straps
during
the
tightening
process
and
insufficient strapping.
Use only
corresponding
quality
products from TITAN!
This tool may be operated only
by personnel who have been
trained
accordingly.
Please
consult your
TITAN packaging
consultant
if you have any
questions about this.
Original
TITAN
max. 6 bar
H241 EU 19/07
