16
Fig. 7
– Appearance of controller РСВ.201.01.00.00
1.6.2.2 Description of operation
The controller is designed to control DC motor, intended to move the turnstile blades, and
electromagnetic brake installed on motor shaft. Control is performed based on the signals coming
from magnetic sensor as well as from motor current sensor. Control commands come to inputs
"IN1" and "IN2" from the controller AUIA.206.21.20.00.
Table 6
№
Connector
/contact
Descriptio
n
Direction
Designation
Signal description and
parameters
X1/1
IN1
ENTRY
«TO BE OPENED A»
1)
logical “0”
(0
1,7) V; 2)
2)
logical “1”
(3,7
5) V; 3)
3)
active level of signal
–
logical “0”;
4)
voltage on open input
≤ 5 V
X1/2
IN2
ENTRY
«LOCK»
X1/3
IN3
ENTRY
Not applicable
X1/4
IN4
ENTRY
To be connected to
microswitch
X1/5
IN5
ENTRY
To be connected to
magnetic sensor
X1/6
IN6
ENTRY
X1/7
IN7
ENTRY
X1/8
IN8
ENTRY
