Network Configuration
12
Network Configuration
In order to access the web interface of the tiptel 40 VoIP there must be a working
network connection (including TCP/IP protocol) between the PC and the tiptel 40
VoIP.
Here the IP address and the sub-network mask have to be set up for your network
environment.
If the tiptel 40 VoIP is connected to a working network, we recommend changing the
settings of the tiptel 40 VoIP.
Note:
If you connect the tiptel 40 VoIP directly to your computer to perform
the configuration, you have to change the network settings on your
computer.
You can find additional information on this topic at www.tiptel.de in the
tiptel 40 VoIP download area.
Network Settings of the tiptel 40 VoIP
To adjust the settings of the tiptel 40 VoIP you need an ISDN telephone that you
connect directly to the S
0
1 of the tiptel 40 VoIP.
Alternatively, you can also configure the device through the ISDN telephone system
using a telephone of your choice. In doing so, however, you must specifically select
the S
0
port on the telephone system to which the tiptel 40 VoIP is connected.
Ask your network administrator which settings are required to manually assign an IP
address. Obtain a free IP address that is authorized for Internet access (no IP
address blocking, no MAC address blocking in the router or firewall).
•
Connect the ISDN telephone to the S
0
1 of the tiptel 40 VoIP.
•
A registered MSN in the telephone is not necessary.
•
Lift the telephone receiver.
•
Now enter the IP address.
Enter
and
then the IP address in the format
nnn*nnn*nnn*nnn#
Example: 192.168.1.1:
