Start-up
6
Notes on Proper Operating Procedures
•
The tiptel 40 VoIP is designed for operation with ISDN telephone systems and
ISDN telephones that comply with the Euro ISDN protocol DSS1. Using the
system on other connections can cause malfunctions.
•
The LAN connection is intended for use on existing networks through connection
to routers, switches or comparable terminals, for example.
•
The tiptel 40 VoIP was designed and manufactured to comply with the "Safety of
Information Technology Devices" (EN 60950) standard. Likewise, only devices
that comply with this or equivalent regulations must be connected to the tiptel 40
VoIP.
•
Installation work must be carried out by a professional. Installation work on the
230v mains network must be carried out by a qualified electrician. VDE 0100
must be observed.
•
In the event of a malfunction, the power cable must be removed from the socket.
The ISDN connector cable and the network cable must also be removed.
•
The tiptel 40 VoIP adapter must not be installed or operated in the following
environments:
•
outdoors
•
in damp or wet rooms (bathrooms, shower, swimming pool...)
•
in areas where there is a risk of explosion
•
in locations exposed to direct sunlight
•
where the ambient temperature is lower than 0 °C or higher than 40 °C
•
in locations subject to severe shaking or vibration
•
in dusty areas.
•
Lay the connecting cables carefully to avoid any danger of tripping. The
connecting cables must not be subjected to excessive pulling or bending or
mechanical loading. The connector cables may only be laid inside the walls of a
building.
