Tion O2 Lite, User Manual, Page: 14 / 36

14 Compact Ventilation Unit
5.3.3 Remote control (RC)
The remote control unit (Fig. 10) is used for manual remote control of the device:
• switching the device between standby and active mode (section 5.3.5),
• adjusting air flow (section 5.3.6),
• adjusting target temperature (section 5.3.8),
• adjusting current time (section 5.3.10),
• configuring timer settings for turning the device on/off (section 5.3.11),
• adjusting minimal admissible air temperature (section 5.3.12),
• adjusting filter replacement alert schedule (section 5.3.13).
«Power». Switching
between standby
and active mode
«SET».
Selection of pa-
rameters
«[-]». Decrease value or deactivate
«[+]». Increase value or activate
Figure 10. Remote control buttons
Before first startup of the device, and if RC is not functioning, install new batteries
as follows:
1. Open battery compartment lid;
2. Insert two AAA 1.5 V batteries (included), making sure to observe polarity;
3. Reinstall compartment lid, pushing it until it clicks.
PLEASE NOTE! The batteries supplied with the device may have shorter
lifespan.
5.3.4 Confirmation sound signals
Sound signals indicate certain functions performed by the device. The meaning of
these sound notifications is given in the table below. If desired, sound notifications can